Biker Scout (Archive) — Star Wars The Black Series

Overview

The Biker Scout at the Archive Collection captures the Imperial Endor speeder-bike-trooper specialist class — the lightly-armoured Imperial soldiers Hasbro packaging actually calls “Scout Troopers” but which the broader collector community catalogues as Biker Scouts for naming consistency. Released June 2019 single-carded as part of the Black Series Archive line. Mainline non-exclusive at $19.99 — standard mainline pricing. 25 joints — substantially above the Phase 4 baseline thanks to dual-axis arm and ankle articulation. One accessory: a blaster. The figure is a re-release and slight repaint of the 2014 Black Series Biker Scout (figure id=2322) — but this time without the speeder bike that the 2014 source release included.

The First Single-Carded Biker Scout

This is structurally meaningful catalogue significance. The Archive release was the first time this character has been made available single-carded. The 2014 source release shipped as a deluxe-priced figure-with-vehicle bundle (Biker Scout plus speeder bike). Until the 2019 Archive release, collectors who wanted just the Biker Scout figure for army-builder deployment configurations had to acquire the more expensive 2014 vehicle bundle.

For collectors building Endor Imperial army displays specifically, the Archive release at $19.99 standard mainline pricing made the Biker Scout structurally accessible at single-figure pricing for the first time in the Black Series line. Multiple-copy acquisitions for canonical Endor Imperial speeder-trooper squad displays became feasible through the Archive distribution where the 2014 vehicle-bundle release made bulk acquisition prohibitively expensive.

This is structurally one of the most catalogue-significant Archive Collection releases — the first single-carded availability for a previously bundle-locked character class. Compare with Boba Fett (Archive) and Bossk (Archive) which restored single-carded availability for already-single-carded source releases. The Biker Scout Archive delivers structurally different value — first-time-ever single-carded availability rather than availability restoration.

The Boot Wash Improvement

The previous 2014 Biker Scout figure had sloppily painted boots which was fixed on this 2019 Archive release. Specific paint commitment commendation worth flagging — the 2014 source release shipped with a wash that only covered half-way up the boots, leaving the upper boot section bare. The 2019 Archive variant addresses this with full-coverage boot wash that captures the canonical Endor environmental wear-and-tear configuration appropriately across the entire boot component.

For collectors evaluating Archive Collection releases for genuine paint improvements, this Biker Scout is structurally meaningful — the boot-wash upgrade is a specific paint-commitment improvement rather than a marginal eye-colour or accent variation. The figure is painted well with subtle grey pouches and “Endor dirt” on the knee caps and the boots — appropriate canonical screen-accurate environmental commitment.

The Single Accessory and Holster Engineering

The figure comes with a blaster which can be placed into a holster located on the right boot. Specific stowage engineering note worth flagging — the boot-mounted holster is a structurally distinctive equipment-stowage feature compared to standard hip-mounted holsters that affect most Imperial-trooper-class figures. The boot location captures the canonical Scout Trooper equipment configuration where the lightweight scout class stows weapons closer to ground level for quick speeder-bike-deployment access.

The small and out-of-scale-looking blaster fits well into both of the figure’s hands. Specific weapon-scale critique worth flagging — the blaster reads as visually undersized compared to the figure’s hands and proportions. This is consistent across all Biker Scout releases and reflects the canonical screen-accurate Scout Trooper sidearm proportions, which are intentionally compact for the lightweight scout role. For collectors who care about strict screen-accuracy commitment, the small-scale blaster is correct rather than a tooling error.

The Speeder Bike Pedal-Mount Holes

A specific catalogue-archeology finding worth flagging — the Biker Scout has two extra holes in the bottom of the boots which are leftovers from the 2014 version. The two extra holes helped the 2014 Biker Scout figure to be secured to the pedals on the Speeder Bike that shipped with the source release.

For collectors reviewing Archive Collection releases for source-body engineering provenance, the boot-sole holes are structural fingerprints of the 2014 vehicle-bundle origin. The Archive release inherits the 2014 source body without retooling to remove the now-vestigial vehicle-mount features. This is consistent with broader Archive Collection release philosophy — Hasbro re-uses source body sculpts without significant retooling, accepting vestigial features that don’t serve current configurations rather than investing in body-sculpt revisions for the re-releases.

For collectors who might want to attach the Archive Biker Scout to a separately-acquired 2014 speeder bike, the pedal-mount holes still function — the Archive figure can integrate with the vehicle-mount engineering despite the Archive release shipping without the vehicle accessory itself.

The Permanent Helmet and Costume Configuration

There is no head underneath the helmet, and the front part of the helmet can’t be flipped up. Standard Scout Trooper character-class design — single helmeted configuration without unmasked-reveal capability. There are no removable parts on the Biker Scout’s armour. The integrated equipment configuration is consistent with the broader Stormtrooper-class design philosophy across the Black Series catalogue.

Articulation

25 joints. Ball-jointed top neck, swivel-jointed middle neck, ball-jointed shoulders, swivel biceps, swivel joints above the elbows, swivel joints below the elbows, ball-jointed wrists, ball-jointed upper body, ball-jointed hips, swivel thighs, swivel-joints above knees, swivel joints below knees, swivel boots, ball-jointed ankles. Substantially above the 17-joint Phase 4 baseline thanks to the dual-axis arm articulation and the swivel boot-cut joint engineering. The 2014-era source body is structurally well-articulated and remains competitive with contemporary articulation standards.

The trooper has no balancing issues. Standard Phase 1-era source-body standing-stability engineering supports multiple display-pose configurations.

Distribution and the Endor Display

Standard mainline Archive Collection release at $19.99 through wide retail channels. The mainline distribution didn’t restrict to retailer exclusives. Aftermarket pricing has remained moderate.

For collectors building canonical Endor battle ensemble displays, multiple Biker Scout copies pair with Princess Leia (Endor) P4-40A-LE5, the Paploo Endor Speeder Bike Pilot P4-40A-PP6, and the broader Rebel-vs-Imperial Endor character-class roster. The Archive release’s single-figure pricing supports cost-effective multi-copy army-builder acquisitions that the 2014 vehicle-bundle release made prohibitively expensive.

Other Biker Scout Figures

The Biker Scout has been a recurring Imperial speeder-trooper character-class release subject. Other notable releases include the Legacy Collection Hoth Speeder Bike Patrol 2-pack (figure id=29), the Saga Collection Battle Of Endor release (figure id=179), the Power of the Jedi Imperial Patrol clean variant (figure id=740) and dirty variant (figure id=769), the Movie Heroes Biker Scout With Speeder Bike (figure id=1192), the Power of the Force 2 Biker Scout With Speeder Bike (figure id=1334), and the 2014 Black Series source body (figure id=2322). The Archive release joins this character-class catalogue as the dedicated 2019 first-single-carded Black Series Biker Scout configuration.

Secondary Market

Single-carded Archive Collection release with dedicated Archive cardback packaging, June 2019. Available through wide retail channels at MSRP and the secondary market with moderate aftermarket pricing. Verify the included blaster is present. Single-accessory loadout simplifies acquisition verification.

Verdict

Biker Scout (Archive) at the 2019 Archive Collection release is structurally one of the most catalogue-significant Archive entries — the first time the character has been made available single-carded in the Black Series line, the boot-wash paint improvement addresses a specific 2014 source-body paint critique with appropriate canonical commitment, the 25-joint articulation with dual-axis arm engineering and swivel-boot-cut delivers structurally above-baseline pose flexibility, the canonical screen-accurate Endor environmental detail (grey pouches, knee-cap dirt, boot weathering) captures appropriate scene-specific commitment, the boot-mounted blaster holster engineering supports canonical Scout Trooper at-rest equipment-stowage display, and the figure stands reliably without balancing issues across multiple combat configurations.

The vestigial boot-sole pedal-mount holes inherited from the 2014 vehicle-bundle source body are structural fingerprints of the source-body origin that don’t serve current configurations. The deliberately-undersized blaster reads visually small compared to figure proportions despite being canonical screen-accurate. The non-removable helmet and integrated armour eliminate costume modification flexibility entirely.

Buy this figure if you collect the Archive Collection as a complete set, if you build Endor Imperial speeder-trooper army-builder displays (the single-figure pricing makes multi-copy acquisitions cost-effective), if you want the first-single-carded Black Series Biker Scout as catalogue-significant historical-context anchor, if you appreciate the boot-wash paint improvement as collecting priority, or if you collect Phase 1-era source-body engineering and the dual-axis arm articulation engineering matches your appreciation. Skip if you specifically want the figure-plus-speeder-bike vehicle bundle (the 2014 source release delivers that bundle configuration) or if you don’t build Endor-context display configurations where multiple Biker Scout copies become structurally meaningful.

The Imperial scout-trooper that became single-carded for the first time at the 2019 Archive Collection release. The figure with the boot-wash paint improvement, the boot-mounted holster engineering, the 25-joint dual-axis arm articulation, and the vestigial pedal-mount boot-sole holes inherited from the 2014 vehicle-bundle source body. The Biker Scout that anchors cost-effective Endor Imperial army-builder displays. Mainline distribution, June 2019.

---

Part of Star Wars The Black Series | Phase 3 Archive Collection. Related: Anakin Skywalker (Archive) P3-ARC-AN | Darth Maul (Archive) P3-ARC-DM | Yoda (Archive) P3-ARC-YO | Paploo P4-40A-PP6.